Klesa
Luvocom® 3F PEEK CF 9676 BK Filament
Luvocom® 3F PEEK CF 9676 BK Filament
Couldn't load pickup availability
Luvocom® 3F PEEK CF 9676 BK Filament is 15% carbon fiber reinforced PEEK (Polyether Ether Ketone), which has exceptional properties in mechanical, thermal and chemical resistance. Carbon fiber PEEK is used in demanding industries such as the oil and gas industry, the automotive industry, mechanical engineering, and aircraft and space technology. This special high-performance polymer grade is tailored to the needs of the 3D printing industry to meet the strength requirements of injection molding and focus on mass production of end products. This 3D4Makers PEEK CF filament has the following features:
Excellent mechanical, thermal and chemical performance Suitable for demanding industrial use Inherently flame resistant High dimensional stability
Material properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.36 g/cm³ | ISO 1183 |
| Tensile strength (23 °C / 50% rh) | 126 MPa | ISO 527 |
| Elongation (23 °C / 50% rh) | 3.9% | ISO 527 |
| Modulus of elasticity (23 °C / 50% rh) | 7.8 GPa | ISO 527 |
| Charpy impact resistance | 66 kJ/m² | European Union |
| Charpy impact resistance with notch | 7 kJ/m² | |
| Heat deformation temperature (HDT A) | 280 °C | ISO 75 |
| Continuous operating temperature | 250 °C | UL 746B |
| Maximum (short-term) operating temperature | 280 °C | |
| Insulation resistance (band electrode R25) | <10⁹ Ω | DIN/IEC 60167 |
| Surface resistance | <10⁹ Ω | DIN IEC 60093 |
Printer recommendations
| Description | Value |
|---|---|
| Printer nozzle temperature | 400 to 450°C |
| The temperature of the heated substrate | 110°C + |
| Print speed | 15 - 30 mm/s |
| Fixing the base | Magigoo HT for glass or PEI board |
| Pre-drying recommendations | 120°C, 4 to 8 hours |
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations. When the 3D printer is not in use, it is important to store the filament in a bag and in a cool, dry, dark place until it is used again.
TDS
You can find the technical data sheet for Luvocom® 3F PEEK CF 9676 BK filament here.
SDS
The material safety information for Luvocom® 3F PEEK CF 9676 BK Filament can be found here.
Share
