Klesa
3D4Makers ASA Filament
3D4Makers ASA Filament
Couldn't load pickup availability
ASA (Acrylonitrile-Styrene-Acrylate) Filament
3D4MAKERS ASA Filament is delivered vacuum-packed in our recyclable box.
Technical information:
Acrylonitrile-styrene-acrylate (ASA) polymers are amorphous and their mechanical properties are similar to ABS plastics. However, the properties of ASA are not as susceptible to external weather conditions. ASA's excellent weather resistance is due to the acrylic ester elastomer. ASA parts have good chemical and heat resistance and high impact resistance, even at low temperatures. Typical ASA applications are the construction industry, automotive industry and leisure parts.
Dimensions and Tolerance
| Size | Diameter tolerance | Swell |
|---|---|---|
| 1.75mm Filament | +/- 0.05 mm | 95% |
| 2.85mm Filament | +/- 0.10 mm | 95% |
Physical properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.07 g/cm³ | ASTM D792 |
| Melt mass flow rate (MFR) (220ᵒC/10KG) | 12 g/10 min | ASTM D1238 |
Mechanical properties
| Description | Value | Test method |
|---|---|---|
| Tensile strength | 47 Mpa | ASTM D638 |
| Bending modulus | 2210 Mpa | ASTM D790 |
| Impact resistance (notched Izod) | 180 y/m | ASTM D256 |
| Rockwell hardness (R scale) | 103 | ASTM D785 |
Print settings
| Description | Value |
|---|---|
| Printer nozzle temperature | 240 to 280°C |
| The temperature of the heated substrate | 90 to 110°C |
| Fixing the base | Magigoo Original for glass or PEI board |
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations. Keep the 3D printer away from direct sunlight. The printer should not be placed in a room where people sleep.
When the 3D printer is not in use, it is important to store the 3D4MAKERS ASA Filament in a bag and in a cool, dry and dark place until it is used again.
TDS
You can find the technical data sheet for ASA here.
MSDS
You can find the material safety information for ASA Filament here.
Share
