Klesa
3D4Makers PETG Filament
3D4Makers PETG Filament
Couldn't load pickup availability
PETG Filament (Polyethylene Terephthalate Glycol-modified)
Technical information:
PETG Filament (Polyethylene Terephthalate Glycol-modified) is a common thermoplastic material of the polyester family, used as fibers in clothing and in bottles of liquids and foodstuffs. This material is easy to print and has a glossy and smooth surface due to excellent thermal properties; the print cools efficiently, resulting in minimal warping and strong inter-layer bonding. The mechanical properties provide high impact resistance and excellent flexibility.
Dimensions and Tolerance
| Size | Diameter tolerance | Swell |
|---|---|---|
| 1.75mm Filament | +/- 0.05mm | 95% |
| 2.85mm Filament | +/- 0.10mm | 95% |
Material properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.27 g/cc | ISO 1183 |
| Tensile strength at yield point | 50 MPa | ISO 527 |
| Traction module | 2020 MPa | ISO 527 |
| Bending modulus | 2050 MPa | ISO 178 |
| Impact resistance - Charpy's method 23ºC | 8.1 kJ/m² | ISO 179 |
| Transparency | 90% | ASTM D1003 |
| Heat resistance | 70˚C | ASTM D648 |
Print settings
| Description | Value |
|---|---|
| Printer nozzle temperature | 220 - 240°C |
| The temperature of the heated substrate | 60 to 80°C |
| Fixing the base | Magigoo Original for glass or PEI board |
Additional information
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations.
When the 3D printer is not in use, it is important to store the 3D4MAKERS PETG Filament in a bag and in a cool (15-25˚C) and dry place protected from UV light until it is used again.
TDS
You can find the technical information sheet for PETG here.
MSDS
You can find the material safety information for PETG Filament here.
Share
