3D4Makers PLLA Filament

PLLA Filament

PLLA, Poly (l-lactic acid), is a biodegradable polymer mainly used in bioengineering research applications. This quality is 100% bio-based and produced from non-GMO renewable plant-based resources according to the NF EN 16785-1 standard. This PLLA is industrially compostable according to the NF EN 13432:2000 standard. Production waste can be recycled in production at a level determined by the specific characteristics of the product.

Biodegradable and industrially compostable Suitable for bioengineering research High transparency 100% bio-based Food safe

PLLA Material properties

Density: 1.24 g/cm³ Shore D hardness (15s): 81 Tensile strength at break: 50 MPa Elongation at break: ≤ 5% Young's modulus: 3500 MPa Bending modulus: 3350 MPa Charpy impact resistance (uncut): 21 kJ/m2 HDT method B120: 55 - 60°C

Print settings

Printing temperature: 210°C (180-220°C) Substrate temperature: 40-60°C Printing speed: 50 mm/s Substrate attachment: Magigoo Original on glass or PEI board

TDS

You can find the technical data sheet for PLLA filament here.

MSDS

Not available yet