Facilan™ C8 Filament
Facilan™ C8 is an additive manufacturing filament designed for manufacturing using 3D printing.
Facilan™ C8 Fused Deposition Modeling filament has higher tensile strength than ABS. Facilan™ C8 has a higher impact resistance than PLA. Facilan™ C8 prints without visible layers on most printers. Facilan™ C8 has the best layer adhesion properties of any 3D printing material. Facilan™ C8 has the best surface quality of all FDM materials. The material has a soft touch. Facilan™ C8 should be smooth with an even matte finish. Developed for high yield manufacturing applications. Consumer-friendly parts for true additive manufacturing. The Facilan™ C8 print profile is available on the Ultimaker Cura marketplace. This material is designed for use in manufacturing applications. With better interlayer bonding, smoother surfaces and increased strength, Facilan™ C8 is a true additive manufacturing material for demanding end-use part applications. Facilan™ C8 Material properties
Density 1.4 g/cm³ Tensile strength 45 MPa Elongation at yield 4% Tensile modulus 3000 MPa Bending strength 67 MPa Bending modulus 3640 MPa Izod impact resistance (groove) 7 kJ/m2 Shore D hardness 72 Thermal deformation temperature 55°C
Print settings
Substrate temperature: 35-50°C Mounting: Magigoo Original on glass or PEI sheet Printing temperature: 195 °C (180-210°C) Printing speed: 40 mm/s
TDS
You can find the technical data sheet for Facilan™ C8 filament here.
MSDS
The material safety information for Facilan™ C8 Filament can be found here.
