Klesa
Luvocom® 3F PAHT CF 9891 Filament
Luvocom® 3F PAHT CF 9891 Filament
Couldn't load pickup availability
Luvocom® 3F PAHT CF 9891 BK Filament
Luvocom® 3F PAHT CF 9891 BK is a high temperature carbon fiber reinforced (15%) polyamide (PA) filament. This grade is based on PA6 and is easy to print, thanks to low distortion and improved layer adhesion, optimized for industrial applications. Common industries where it is used include robotics, drones, automotive, aerospace, and widely in the field of functional prototypes and final products. This special engineering polymer grade is tailored to the needs of the 3D printing industry to meet the strength requirements of injection molding and is focused on mass production of end products, and the filament can be used in conventional FFF / FDM 3D printing systems without heated chambers. This 3D4Makers PAHT CF filament offers the following features:
Little effect of humidity and temperature on measurements and electrical properties Designed for industrial applications Carbon fiber reinforced material (15%) PA6 based material
Material properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.24 g/cm³ | ISO 1183-3 |
| Tensile strength (23 °C / 50% rh) | 130 MPa | ISO 527 |
| Elongation at maximum force | 2% | ISO 527 |
| Modulus of elasticity (23 °C / 50% rh) | 11.5 GPa | ISO 527 |
| Charpy impact resistance | 35 kJ/m² | ISO 179 1eU |
| Heat deformation temperature | 90 °C | ISO 75 |
| Continuous operating temperature (20,000 h) | 120 °C | EC 60216 |
| Service temperature (lifetime max. 200h) | 160 °C | |
| Insulation resistance strip electrode (R25) | ≤10² Ω | DIN IEC 60167 |
| Surface resistance (ROB) | <10² Ω | DIN IEC 60093 |
Printer recommendations
| Description | Value |
|---|---|
| Printer nozzle temperature | 260 to 290°C |
| The temperature of the heated substrate | 60 to 80°C |
| Print speed | 40 - 60 mm/s |
| Fixing the base | Magigoo PA for glass or PEI board |
| Pre-drying recommendations | 100°C, 4 to 6 hours or 80°C, 12 hours |
| Profile also available for Drywise In-Line dryer | |
| Additional | We recommend using a suitable nozzle (>0.5mm) for filaments containing carbon fiber |
*Printing profile available in the Ultimaker Marketplace
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations. When the 3D printer is not in use, it is important to store the filament in a bag and in a cool, dry, dark place until it is used again.
TDS
You can find the technical data sheet for LUVOCOM 3F PAHT® 9936 BK filament here.
SDS
You can find the material safety information for LUVOCOM 3F PAHT® 9936 BK Filament here.
Printing instructions
Printing instructions for LUVOCOM 3F PAHT® 9936 BK Filament can be found here.
Share
