Klesa
PEI Ultem 1010 Filament
PEI Ultem 1010 Filament
Couldn't load pickup availability
PEI Ultem 1010 (Polyetherimide) Filament
3D4MAKERS PEI Filament is delivered vacuum-packed in a recyclable box.
Technical information:
Polyetherimide (PEI) Ultem 1010 is an amorphous amber to transparent thermoplastic with a glass transition temperature (Tg) of 217°C and can withstand continuous use up to 170°C. This inherently flame retardant plastic is rated UL94 V0 and 5VA. 3D4MAKERS has chosen Ultem 1010 as their filament.
3D4MAKERS' PEI Filament has unique properties because it is not in contact with water during the production process and is directly vacuum packed. These properties make 3D4MAKERS' PEI Filament particularly suitable for use in FDM and FFF 3D printers. The material has excellent adhesion between layers, which significantly improves impact resistance, strength, durability and the printing process.
Dimensions and Tolerance
| Size | Diameter tolerance | Swell |
|---|---|---|
| 1.75mm Filament | +/- 0.05mm | 95% |
| 2.85mm Filament | +/- 0.10mm | 95% |
Physical properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.27 g/cm³ | ISO 1183 |
| Traction module | 3200 Mpa | ISO 527 |
| Tensile strength | 105 MPa | ISO 527 |
| Impact resistance Notched Izod | 5.0 Kj/m² | ISO 180 |
Print settings
| Description | Value |
|---|---|
| Printer nozzle temperature | 360 to 400°C |
| The temperature of the heated substrate | 120 to 160°C |
| Fixing the base | Magigoo HT for glass or PEI board |
| Drying recommendations | 120°C, at least 4 hours |
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations. Keep the 3D printer away from sunlight. This room cannot be used as a bedroom.
When the 3D printer is not in use, it is important to store the 3D4MAKERS PEI Filament in a bag and in a cool, dry and dark place until it is used again.
Safety information
REGULATION (EC) No. 1272/2008. According to EU regulations, this product is not classified as dangerous for delivery/use.
According to EU directive 67/548/EEC or 1999/45/EC. According to EU criteria, this product is not classified as dangerous for delivery/use.
Composition and ingredient information
This product is a mixture.
| Ingredient name | CAS number | Concentration (%) |
|---|---|---|
| Polyetherimide | 61128-46-9 | >=99% |
Exposure control / Personal protection
Local exhaust ventilation is required at the workplace or in the 3D printer.
Legally required information
-
Certain safety, health and environmental regulations and legislation for the substance or mixture.
-
Chemical safety assessment: Not applicable
RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorization and Restriction of Chemicals).
Recommended Limits
Do not use in medical applications that require permanent implantation into the human body.
The PEI Filament produced by 3D4MAKERS meets the European RoHS and REACH guidelines.
TDS
You can find the technical data sheet for PEI Ultem 9085 filament here.
MSDS
You can find the material safety information sheet for PEI Ultem 1010 Filament here.
Share
