Klesa
PPSU Filament
PPSU Filament
Couldn't load pickup availability
PPSU (Polyphenylsulfone) Filament
3D4MAKERS PPSU Filament is delivered vacuum-packed in a recyclable box.
Technical information:
Polyphenylsulfone (PPSU) is an amorphous high-performance thermoplastic that offers better impact resistance and chemical resistance than PEI. PPSU withstands operating temperatures up to 180 °C. PPSU has superior resistance to hydrolysis compared to other amorphous thermoplastics, as measured in steam sterilization cycles, and has virtually unlimited steam sterilizability. It is also resistant to common acids and bases over a wide temperature range. Applications include aerospace, automotive, electrical/electronics, engineering, marine and chemical industries. The PPSU filament is based on Solvay technology.
3D4MAKERS' PPSU filament has unique properties as it is not in contact with water during the production process and is directly vacuum packed. These properties make 3D4MAKERS' PPSU filament particularly suitable for use in FDM and FFF 3D printers. The material has excellent adhesion between layers, which significantly improves impact resistance, strength, durability and the printing process.
The PPSU filament produced by 3D4MAKERS meets ISO10993 for medical applications and meets the European regulation EC No. 1935/2004, EC No. 2023/2006 and EC No. 10/2011 concerning plastic materials and products in contact with food, and is also FDA (Food and Drug Administration) approved for food contact. The dyes used by 3D4MAKERS to color the filament also meet these European regulations.
Dimensions and Tolerance
| Size | Diameter tolerance | Swell |
|---|---|---|
| 1.75mm Filament | +/- 0.05mm | 99% |
| 2.85mm Filament | +/- 0.10mm | 99% |
Physical properties
| Description | Value | Test method |
|---|---|---|
| Density | 1.29 g/cm³ | ASTM D792 |
| Tensile strength | 2340 Mpa | ASTM D638 |
| Bending modulus | 2410 Mpa | ASTM D790 |
| Impact resistance Notched Izod | 690 J/m | ASTM D256 |
| Impact resistance of traction effect | 399 KJ/m² | ASTM D1822 |
Print settings
| Description | Value |
|---|---|
| Printer nozzle temperature | 360 to 400°C |
| The temperature of the heated substrate | 120 to 160°C |
| Fixing the base | Magigoo HT for glass or PEI board |
| Drying recommendations | 120°C, 2-4 hours |
For best printing results, we recommend keeping the 3D printer in a room with no draft or temperature fluctuations. Keep the 3D printer away from sunlight. This room cannot be used as a bedroom.
When the 3D printer is not in use, it is important to store the 3D4MAKERS PPSU filament in a bag and in a cool, dry, dark place until it is used again.
TDS
You can find the technical data sheet for PPSU filament here.
MSDS
You can find the material safety information sheet for PPSU Filament here.
Share
